Products - Refinish
Refinish


Combi Pack System


General Industrial

High Performance Epoxy Coating

1. COMBI PACK SYSTEM
COMBI PACKS IN
• 2K PU Clears
• 2K PU Primer Surfacer
• 2K Epoxy Primer Surfacer
• Ready Mix Shades

Note :
Combi Pack Available in 1 Lit & 500 ml

   
 
 


2. LIZEN PUTTY WITH HARDNER

1) Have very good adhesion on various substrates (Al, GI, MS, and Steel).
2) Very fast drying and can be sand after 20 mins of air drying.
3) High pigment loading so easily fills the pin holes, irregularities, and scratches.
4) Good flexibility so does not show cracking even after fine sanding.


 

 
 

3. LIZEN 2 K ETCH PRIMER

1) Have a very good opacity or hiding power (8-10 m2/ Ltr).
2) Flexible mixing ratio. (Can be used in 1:1 or 2:1 mixing ratio).
3) Highest Wet adhesive power and excellent corrosion resistance.
4) Have very good adhesion to non ferrous material.
 
 

4. LIZEN 2K EPOXY PRIMER

1) It is chromate free, not hazardous to health at the time of application.
2) Have very good adhesion on various substrates (Al, FRP, and Steel).
3) Applicable in various climatic conditions (from 10 to 80 deg relative humidity) and very good temp stability.
4) Good chemical, mechanical properties and corrosion resistance (more than 1000 hrs).
 
 

5. LIZEN 2K READY MIX COLOUR SHADE, LEAD AND CHROMATE FREE, VOC LESS THAN 420 GMS/LTR

1) High solid content so low VOC system (Environmental friendly).
2) Better hiding power so low material consumption per vehicle (Cost effective system).
3) Good outdoor and QUV exposure stability (Passes up to 2000 hrs QUV).
4) Balance in hardness and scratch resistance properties.
5) This top coat shows good stain resistance properties.
 
 

6. LIZEN BASECOAT (BC) READY MIX COLOURS

1) Very fast drying and quickly over coated with clear coats (Time saving in multi colour painting process).
2) Metallic pigments adjust themselves easily and gives smooth surface for clear (maintain high gloss of clear coat).
3) Increased solid content increases hiding power so less consumption of base coat (Solvent output reduction).
4) Have very good intercoat adhesion property.
 
 

7. Clear Coats

1) Fast drying and low baking system provides excellent gloss and DOI.
2) Good outdoor and QUV exposure stability (Passes up to 2000 hrs QUV).
3) Balance in hardness and scratch resistance properties.
4) Shows good anti graffiti and stain resistance properties.
5) Shows excellent chemical and mechanical properties.
 
 

8. HIGH QUALITY 2K THINNER

1) Colourless liquid so as not affect the colour of original paint.
2) Completely miscible in paint at normal working temp.
3) Completely evaporate and form no part of dried paint film.
4) Act only with medium and not react with pigments to cause precipitation.
5) Not powerful enough to disturb or soften the previous coatings.
6) Free from residues which may affect the film.
 
 

9. HARDNER AS PER CLIMATE REQUIREMENT

1) Higher solids.
2) Aliphatic Di isocyanates, shows better weathering (QUV) resistance properties.
3) Have very good stability (More self life).
4) Variety of hardeners available, easy to select hardner as per the climatic requirement.
 
 

10. METAL CLEANER

1) Act as degreasing, derusting agents and creates anticorrosive layer which helps to increase the paint film life.
2) Act as adhesion promoter for steel, aluminium and zinc.
3) Colourless liquid.
4) Use alone or along with thinner as per the requirement.
 
 

11. SILICON REMOVER

1) CFC free liquid.
2) Light or very less odours.
3) Usable for cleaning the metallic and polymeric material. Not attacks on lower grade plastic substrate.